Failure of Agricultural Chain Wear And Failure Mobile Community

Page Information

  • Posted By: minseok kim
  • Posted On: Sep 19, 2019
  • Views: 69
  • Likes: 2
  • Category: Electronics
  • Description: The general failure of the agricultural chain(GETECHAIN) https://www.getechain.com/product/agricultural-chain/ is the failure of the chain wear, which leads to the failure of the agricultural chain. The failure of the chain of the agricultural chain causes the failure of the chain to be a common and obvious manifestation. There are many reasons for this failure, but the main reason is that the material of the agricultural chain is poor and the workers at the time of operation are not operating properly. For the whole of the agricultural chain, the parts that are prone to wear are the sprocket and the pin shaft. The wear of these two parts is mainly due to insufficient local lubrication. Therefore, in order to avoid this phenomenon, the operator should pay attention to checking the lubrication effect frequently. Add lubricant, check for abrasives in the lubricant or change the lubrication method. If the sprocket is found to be slightly worn, the sprocket can be reversed so that the lighter side faces the agricultural chain. In addition, if the use environment is bad or the lubrication is poor, it will cause the hinge to wear. Once the chain hinge wears, the chain link becomes longer, it is easy to cause tooth skipping or unlinking during work, reduce the chain life and accelerate the chain. Failure. Click conveyor chain https://www.getechain.com/product/conveyor-chain/ to learn about more information.