Five Characteristics of Driving Chain Manufacturer Industry Mobile Community

Page Information

  • Posted By: minseok kim
  • Posted On: Jul 12, 2019
  • Views: 10
  • Likes: 1
  • Category: Celebrities
  • Description: As we all know, the Driving chain manufacturer(GETECHAIN) industry is a discrete manufacturing industry. Its production method is to process raw materials into parts, which are assembled into finished products through component assembly and overall assembly. Its characteristics are mainly as follows: 1. With the globalization of industrial production and the rapid development of information technology, the personalized needs of customers are also gradually increasing, and the variety of products is becoming more and more diversified. At the same time, market demand is changing rapidly, making it more difficult to predict. It is not continuous and difficult to provide a reliable basis for reasonable production arrangement. 2. The product structure of the driving chain is relatively complex. It is generally assembled by rollers, sleeves, pin shafts, link plates, and other parts. However, there may be more than seven or eight kinds of the non-standard driving chain but as many as dozens of kinds of parts. These parts are limited by the processing capacity and equipment. Some need to be purchased from external processing, others need to be processed by themselves, and the calculation and arrangement of the production plan are very complicated due to frequent changes in the production process. At present, with a large number of orders increasing, under certain manufacturing capacity, there is a phenomenon of temporary insertion of orders urgently needed by some large customers, which makes it difficult to give consideration to the flexibility and seriousness of production planning, and production planning is often difficult to guide production. 3. Due to the uncertainty of the production plan and the lack of real-time grasp of the stock materials, stock materials are often sluggish and the materials needed for production are short of parts. Incompatible phenomena coexist at the same time. This is why, on the one hand, the manufacturing cost calculated by the financial department has increased significantly, while on the other hand, the output value has not increased. 4. Due to the different working procedures and process control of each part of the driving chain, the production capacity of each working procedure is usually unbalanced, the processing difficulty varies from large to small, the semi-finished product completion time varies from long to short, barrel effect is easy to occur in production, production is restricted by key bottleneck resources, and often one part is not in place, affecting the timely completion and delivery of the entire contract. 5. Some outsourced parts need to be processed by outsourced manufacturers. Due to the large variety and variable quantity, some processes are relatively complicated. For example, some parts are processed in one outsourced manufacturer and then processed in another or several outsourced manufacturers for the next process. Thus, tracking and controlling the quality and delivery time of outsourced products is also very difficult. Although this phenomenon has improved with the introduction of the concept of first management, which brings the supplier into the controllable management scope, it is still not very optimistic. Click agricultural chain to learn about more information.