How to Upgrade Building Material Industry and Install Heavy Roller Chain Mobile Community

Page Information

  • Posted By: minseok kim
  • Posted On: Jul 03, 2019
  • Views: 7
  • Likes: 1
  • Category: From Life
  • Description: The improvement of building materials industry and the quality of heavy roller chain(GETECHAIN) are related to the work efficiency, and the correct installation method is the basic requirement to ensure the quality. Let's look at the specific steps below: 1. First of all, we will first determine the center line of the lifting of the building materials industry and the head and tail wheels of the heavy roller chain. Secondly, determine the horizontal plane of the head and tail wheel sets. (Note: In this place, the level is usually first found through the embedded plate of the base) 2. Then plug the inclined iron or gasket to ensure the level of the head and tail wheel sets is within 1-2mm. Thirdly, install the intermediate bracket to ensure that it is on a horizontal line. Before welding between the bracket and the embedded plate of the bracket (note: ensure horizontal and vertical), continuous welding is required. Then install the rail. During the installation of the rail, ensure the connection radian between the rail and the head and tail sprockets to avoid poor connection between the heavy roller chain and sprocket teeth. 3. Finally, the installation of the remaining chain plates and rollers is very simple, mainly the alignment just started. The determination of horizontal and vertical shall be as accurate as possible. If the deviation is too large, it must be re-searched, and it cannot be adjusted. Click Roller chain to learn about more information.