Many friends are using Tap Filter & Shower Filter https://www.kokoelectric.com/product/tap-filter-shower-filter/ , but they are also confused. They often think that tap filter & shower filter are... moreMany friends are using Tap Filter & Shower Filter https://www.kokoelectric.com/product/tap-filter-shower-filter/ , but they are also confused. They often think that tap filter & shower filter are very useful because once the faucet itself has no effect, we can use the tap filter & shower filter to prevent it from being polluted. Therefore, we must use clean taps to make sense.
Tap filter & shower filter adopt porous inorganic microfiltration technology and are made of pure natural diatomite and sintered at high temperature. It can filter suspended pollutants such as parasites and sediments in water, effectively remove bacteria, algae and chlorine, and harmful dissolved heavy metal ions (lead, cadmium, chromium, etc.) to provide safe and healthy drinking water for washing vegetables and rice.
The main function of the tap filter & shower filter is the filter element. The tap filter & shower filter have certain effects, and the functions of different filter elements are different. The tap filter & shower filter element adopt super filter element, with a filtering accuracy of 0.01 micron, which can filter out bacteria, colloid, rust, residual chlorine, etc. and can directly discharge water. Using a ceramic core, the filtering accuracy is 0.1-0.5 microns, which can be filtered out. Pathogenic bacteria, colloid, rust, residual chlorine, etc. can also be used with sintered carbon rod filter, which can filter out rust and sediment, colloid, residual chlorine, etc. to improve the taste of tap water.
Many people know that water filters have good spare parts, but they don't know why Water Filter Spare Parts(KOKOELECTRIC) https://www.kokoelectric.com/
help us to purify the water. Next, let's talk... moreMany people know that water filters have good spare parts, but they don't know why Water Filter Spare Parts(KOKOELECTRIC) https://www.kokoelectric.com/
help us to purify the water. Next, let's talk about what is in the water and why we need to install a water filter.
1. Particulate impurities: Domestic drinking water is usually municipal tap water. Tap water is clean when it comes out of the tap water plant, but secondary pollution, mainly rust, silt and so on, occur when it flows to the household through pipelines. Therefore, the particulate impurities must be solved.
2. Colorful Odor: Does your tap water often have yellow water? Is there any serious odor? Rust in tap water pipes and yellow water are common. Bleaching powder is used for disinfection of tap water, and the water in your home will naturally have a taste. Therefore, it is necessary to solve the peculiar smell of different colors.
3. Scale: Scale is a common problem in northern families and also in the northwest. The formation of scale is caused by the kettle boiling water for a long time. Using the water filter can not only remove the scale but also avoid it.
4. Bacteria: Water grows bacteria easily at a certain temperature, so it is very necessary to install a device to solve the bacteria problem at the home terminal.
If you are interested in our products, you can click Water Purifier Spare Parts https://www.kokoelectric.com/
to learn more information. less
Chair Mould(FURNITUREMOULD) https://www.furnituremould.com/product/chair-table-stool-mould/
is the key moulding tools for chair products. If the quality of the chair mould changes, such as shape... moreChair Mould(FURNITUREMOULD) https://www.furnituremould.com/product/chair-table-stool-mould/
is the key moulding tools for chair products. If the quality of the chair mould changes, such as shape change, position shift, rough surface, and tight contact with the mould surface, it will directly affect the quality of plastic products. Therefore, we must pay attention to the use and maintenance of the chair mould.
The main points are as follows:
(1) Before production, check the parts of the chair mould for impurities. Dirt, the paint, impurities, and dirt in the chair mould should be scrubbed with cotton gauze, and the glued residue should be cleaned with a copper cutter.
(2) Reasonable selection of clamping force, which is based on the fact that no flash is produced when the product is formed. Excessive clamping force increases the power consumption and speeds up the wear of the chair mould and transmission parts.
(3) The sliding parts of the chair mould, such as the guidepost, the push rod, the reset rod, the tie rod, etc., are oiled twice a day during the summer and only once in the winter.
(4) When the full-time chair mould is on duty, the chair mould in production should be inspected and observed, and problems should be dealt with in a timely manner. When the maintenance worker takes over, he should be employed 5 to 10 minutes in advance to check the production status of the chair mould—especially for the chair mould that often have secondary waste products. The more problematic and more prominent chair mould should pay more attention.
(5) During production, power outages and shutdowns occur. For more than 6 hours of continuous shutdown, in the rainy season in the south, when the air is humid, the moulding surface, the parting surface, and the sliding surface should be sprayed with anti-rust oil. If the machine is not stopped for more than 24 hours in the rainy season, it is necessary to spray anti-rust lubricant on the moulding surface of the chair mould, the parting surface, and the sliding surface. For the temporary use of the chair mould that needs to be put into stock, thoroughly clean it before entering the warehouse, then spray the anti-rust lubricant, and put it into the warehouse after the mould is tight.
(6) It is not allowed to hit any part of the chair mould with a hammer to prevent knock marks or deformation.
(7) The equipment is temporarily not used, and the chair mould on the injection should be coated with anti-rust oil. It is not allowed to be in a mould clamping state for a long time between the mould and the fixed mould to prevent deformation under pressure.
As special process equipment, the Daily Necessities Mould(FURNITUREMOULD) https://www.furnituremould.com/product/daily-necessities-mould/
has the same characteristics as other mechanical... moreAs special process equipment, the Daily Necessities Mould(FURNITUREMOULD) https://www.furnituremould.com/product/daily-necessities-mould/
has the same characteristics as other mechanical manufacturing industries. However, due to the difficulty in making daily necessities, the daily necessities mould processing also have its own unique characteristics.
1. Daily necessities mould single-piece production, are customized, multi-variety production mode. Each daily necessities mould can only form a fixed daily necessity mould. Therefore, the production cost of daily necessities mould is also relatively high.
2. The daily necessities mould processing process is relatively concentrated, so to ensure the quality and progress of daily necessities mould processing, simplify management and process turnaround time.
3. The daily necessities mould manufacturing have high-quality requirements. Because the precision of the daily necessities mould directly affects the precision of daily necessities. Only the precision of the daily necessities of the mould is high, and the precision of the daily necessities can be qualified.
4. The diversification of daily necessities product structure will inevitably lead to the complication of daily necessities mould processing.
5. The daily necessities mould processing conditions are complex, different daily necessities mould, the hardness of the mould steel used is not the same, for the material hardness is high, the mould processing equipment requirements are also relatively high.