Bonded fabric is a new type of material made by bonding one or more layers of textile materials, non-woven materials and other functional materials. Suitable for sofa, clothing and other textiles, it... moreBonded fabric is a new type of material made by bonding one or more layers of textile materials, non-woven materials and other functional materials. Suitable for sofa, clothing and other textiles, it is an indispensable fabric for people's home life. Bonded fabric is made by using superfine fiber in specific textile processing and unique dyeing finishing, and then processed by "bonded " equipment. Bonded fabric has applied the high technology and new materials of "new synthetic fiber", and has many excellent properties (compared with common synthetic fiber), such as fine, delicate, elegant and warm fabric, full appearance, windproof and breathable fabric, and certain waterproof function. Its main features are warmth and good breathability.
Because the bonded fabric adopts superfine fiber, the fabric has high cleaning ability, namely decontamination ability. The fabric is also characterized by good wear resistance, and the superfine fiber fabric is soft, breathable and moisture permeable, so it has obvious advantages in tactile sensation and physiological comfort, and the crease resistance of superfine fiber fabric is poor (this is due to the soft fiber and poor elastic recovery after crease); In order to overcome this shortcoming, "compound" process was adopted, which greatly improved the disadvantage of poor crease resistance of superfine fiber fabric. Bonded fabric is a popular coat fabric in Europe and America at present.
Sports and leisure clothing uses knitted fabric combined with knitted fabric, which has the effect of woven fabric and good elasticity. Therefore, it is still popular among consumers of this kind of clothing.
Because of our improper use, it will cause scratch of Metal Composite Panel, or some external factors may also cause scratch of metal composite panel, so what is the solution to prevent scratch of... moreBecause of our improper use, it will cause scratch of Metal Composite Panel, or some external factors may also cause scratch of metal composite panel, so what is the solution to prevent scratch of metal composite panel?
When placing the finished metal composite panel, it is best to separate them with soft cloth, so as to reduce the scars caused by friction between them. We also need to pay attention when transporting, be careful to handle with care, and don't drag the metal composite panel on the ground at will.
When we use the fork bar to send the profile from the discharging track to the pendulum bed, we must pay attention to some. If the speed is too fast, the metal composite panel will be damaged. When we take the metal composite panel on the pendulum bed, don't drag it hard, otherwise scratches will be formed on the outer surface of the aluminum panel. Finally, there is another possibility that it is in the process of transportation, which is also the most likely situation of scratching of metal composite panel.
Signage Aluminum Composite Panel is also our hot product, if you are interested in our products, you can click our website: https://www.alubang.net/less
«Seules des recherches de courte durée analysant de petits échantillons ont découvert que les cétones exogènes peuvent aider à obtenir une cétose plus rapidement et peuvent réduire l'envie... more«Seules des recherches de courte durée analysant de petits échantillons ont découvert que les cétones exogènes peuvent aider à obtenir une cétose plus rapidement et peuvent réduire l'envie de manger», a-t-elle déclaré au journal Women's Health.
Lunaire Keto
Un autre complément généralement utilisé est les cétones exogènes, un type synthétique de cétone connu sous le nom de bêta-hydroxybtyrate, qui est créé naturellement par le corps.
1. Galvanized Steel Composite Panel should be stored or installed in a dry and ventilated place in an appropriate way to avoid water accumulation, and the ambient temperature should not be higher... more1. Galvanized Steel Composite Panel should be stored or installed in a dry and ventilated place in an appropriate way to avoid water accumulation, and the ambient temperature should not be higher than 70℃. Avoid installation in abnormal environments, such as smoke, wind and sand, radiation, harmful gases and chemicals.
2. Galvanized steel composite panel shall be laid flat during transportation or storage. When transporting, the four sides of the panel must be lifted at the same time. Do not drag unilaterally to avoid scratching the panel surface.
3. When slotting with slotting machine or gong machine, round head or V-shaped flat-head saw blade or milling cutter should be used for slotting, and 0.2-0.3 mm thick plastic core panel should be left to bend along with panel to increase strength and toughness and prevent hydrogenation of aluminum sheet. Excessive bending angle, cutting injury to aluminum panel or too thick plastic left behind will cause aluminum plate to break or film burst during bending.
4. When bending edges, it is necessary to apply uniform force and form once, and do not bend repeatedly, otherwise the aluminum panel will break.
5. In order to keep the flatness of galvanized steel composite panel and enhance its wind resistance, the galvanized steel composite panel should be lined with skeleton after bending and glued to the plate.
6. When it is used for arc surface decoration, the galvanized steel composite panel should be bent by bending equipment, and the bending radius should be greater than 30cm, so that the plate can gradually reach the required curved surface.
7. Install the galvanized steel composite panel on the same plane according to the same flow direction, otherwise the viewing angle color difference may be caused.
8. The protective film should be torn off within 45 days after the galvanized steel composite panel is installed. Otherwise, the protective film will age due to long-term exposure in the sun, which may cause glue sticking when tearing the film.
9. If there is pollution on the panel surface during construction or use, clean it gently with neutral detergent or alcohol, and avoid cleaning it with strong acid and strong alkaline detergent.
We are also a professional Aluminum Composite Panel Manufacturers, if necessary, please contact us. less
In the process of designing shrink sleeve labels, attention should be paid to the aesthetic feeling of color level and the aesthetic characteristics of being near reality and far away from illusion.... moreIn the process of designing shrink sleeve labels, attention should be paid to the aesthetic feeling of color level and the aesthetic characteristics of being near reality and far away from illusion. According to the special visual effect of CMYK color on various materials, appropriate dot compensation and adjustment should be given to ensure that the design color of shrink sleeve labels is full and make up for product defects caused in the printing process.
Many consumers are not very familiar with how to maintain the fittings of the water purifier when using the water purifier, thus causing quality problems of the water purifier. For Water Purifier... moreMany consumers are not very familiar with how to maintain the fittings of the water purifier when using the water purifier, thus causing quality problems of the water purifier. For Water Purifier Spare Parts(KOKOELECTRIC) https://www.kokoelectric.com/ , it also needs to be protected so that you can use it safely.
Water purifier spare parts maintenance, there are a lot of exquisite:
1. Avoid direct sunlight
No matter what kind of water purification equipment, attention should be paid to avoid direct sunlight, because sunlight can breed blue algae, so the water purifier should be properly protected. If it is to be placed on the balcony or in a place where direct sunlight is likely to reach during installation, it is recommended to build a sunshade cover and baffle near the water purifier, which will have the effect of preventing algae.
2. Avoid heat sources
If it is too close to the water heater, long-term baking will affect the service life of plastic parts. After installation, the original users of bottled water made their own bottled water, thus drinking water is safer, more convenient and cheaper. However, it should be noted here that the bucket should be cleaned with the first effluent before making water.
3. The correct use of water purifier spare parts
In addition, while using the water purifier, there are still some methods and techniques. Generally, when cleaning the filter element, the filter element is taken out and cleaned, and then installed according to the original position. In addition, the installation process is very simple and quick and does not require any professional technology, so that when you use or clean, you do not have to worry about much trouble. When you really operate, it is really simple.
Chain transmission mainly refers to the use of various types of chains for transmission. In the process of general chain transmission, various types of chains will be used. According to different... moreChain transmission mainly refers to the use of various types of chains for transmission. In the process of general chain transmission, various types of chains will be used. According to different equipment, the chains used are also different. However, the main purpose of chain transmission is operation transmission. What are the characteristics of chain transmission in use? The following is an introduction to the relevant contents of chain transmission by the Driving chain manufacturer(GETECHAIN) https://www.getechain.com/product/driving-chain/.
Most sprocket equipment uses the basic sprocket components, as well as the tensioning chain and weight box to adjust the tension of the adjustment. Its structure is not very complicated, so it is not very difficult to operate and maintain, but it can still ensure that the chain has a very stable tension in the application process, can continuously adhere to the proper tension, and will not sometimes loose or tight. Moreover, when the chain wheel is used together with the tension chain, the chain wheel will run in a regular direction without swinging left and right like the wire rope and pulley mechanism, and the operation is very stable and reliable.
In the face of water pollution, I believe most people will still choose Water Filter Spare Parts(KOKOELECTRIC) https://www.kokoelectric.com/
. The household water filter is a simple, convenient and... moreIn the face of water pollution, I believe most people will still choose Water Filter Spare Parts(KOKOELECTRIC) https://www.kokoelectric.com/
. The household water filter is a simple, convenient and practical small-sized household terminal water treatment equipment. It is the most practical terminal water treatment method in the world at present by directly connecting to tap water and physically removing impurities in the water by using multi-stage filter elements. The effluent is clean, safe, environment-friendly and healthy. A good household water filter can not only fully meet the needs of household drinking water, but also be used for cooking, bathing, beauty treatment, washing, etc.
1. The household water filter has a health care function
There are many kinds of water filters on the market. Some brands claim that purified water has beauty and health care effects in addition to publicizing that water filters have the functions of filtering bacteria, viruses, residual chlorine, and impurities. In fact, no matter what kind of technology and material consumers choose, in the final analysis, it is only filtering water. The purified water will not have special health care functions, and what is added artificially is not necessarily beneficial to the body.
2. The water from the water filter is directly drunk
Many people think that everything will be fine if a water filter is installed. They think that it can filter out all harmful substances and can be drunk directly. In fact, many water filters mainly improve water quality and solve the secondary pollution during the transportation of tap water. Not all the water flowing out of the water filters can reach the standard of direct drinking.
3. Multi-stage filtration is safer
Many domestic water filters sell multi-stage filtration in publicity, making people feel that the water filtered out in this way is safer. In fact, several levels of filtration have little to do with the quality of filtered water. Some low-end water filters will also have 4 or 5 filter elements installed, but the filtering efficiency may not be as good as a high-performance filter element. The quality of water depends mainly on the material and process of the filter element. At the same time, the heart of domestic water filters-filter elements-are mainly those types. No amount of filter elements will increase the efficiency of the water filter.
In short, household water filters are gradually becoming a new choice for citizens to drink water. According to reports, after installing the water filter in place at one time, families not only do not have the tedious procedures of ordering bottled water, waiting for water to be delivered to the door after asking for water, but also can easily access safe and safe purified water at any time.
If you are interested in our products, you can click Water Purifier Spare Parts https://www.kokoelectric.com/
to learn more information. less
No matter what kind of products you buy, it is very normal to be sensitive to price. When buying the Household Product Mould(FURNITUREMOULD) ... moreNo matter what kind of products you buy, it is very normal to be sensitive to price. When buying the Household Product Mould(FURNITUREMOULD) https://www.furnituremould.com/product/daily-necessities-mould/
, many customers still prefer to pay attention to the price. Of course, how to buy household product mould depends on whether the price is reasonable, which has also become a very knotty problem for many customers.
Pay attention to the price problem when purchasing household product mould, because the price will play a certain reference role in a certain sense. Customers who buy for the first time can take two ways to see if the price of the products they buy is reasonable. First, look at the average price of the whole industry. The average price of any industry will have very obvious reference significance. Second, compare the actual prices of large companies.
Since the price issue is more sensitive, a careful comparison of prices will always be beneficial, and practical methods must be mastered to see how prices are reasonable. The more individuals know about prices, the more they will eventually be able to buy more cost-effective products, especially household product mould at reasonable prices.
What is the water purification capacity of the ro system component after integrating the scale inhibition and low wastewater functions? In particular, how about the ability to remove heavy metal... moreWhat is the water purification capacity of the ro system component after integrating the scale inhibition and low wastewater functions? In particular, how about the ability to remove heavy metal ions?
First, why can the Ro System Component(KOKOELECTRIC) https://www.kokoelectric.com/product/ro-system-component/
remove heavy metal ions? Because its membrane pores are small, only 0.0001 microns. Driven by external pressure, sewage rich in heavy metal ions is forced to flow to the other side of the membrane pore. Because the pores of the membrane are much smaller than the size of heavy metal ions, heavy metal ions cannot pass, and the water is purified. The trapped heavy metal ions are discharged from the body with the wastewater.
Secondly, although the wastewater ratio of the ro system component is only 1:1, its wastewater ratio is not reduced by expanding the pore diameter. It is achieved by improving the power structure, diaphragm structure, and channel settings. That is to say, the pore size of the water-saving membrane is still 0.0001 micron, so no matter how, heavy metal ions will not pass through the membrane pores, and consumers do not have to worry.
Then, through repeated experiments, the reverse osmosis system components have a very good scale inhibition effect, which can better protect the RO membrane and prolong its service life. In line with China's sustainable development strategy of energy conservation, environmental protection, and green, it has been recognized and popular by many users.
(1) Breakdown of dielectric and formation of discharge channels
Since the surface of the tool electrode and the workpiece is always microscopically uneven, the power plant generated at the tip of the closest pole is the strongest, and the impurities in the medium (such as metal particles, carbon particles, etc.) are rapidly aggregated under the action of the electric field force. To a place with a strong electric field. When the electric field strength increases above 10^6V/cm2, electrons escape from the surface of the cathode, move to the anode at high speed and strike the molecules and neutral atoms in the medium, resulting in "avalanche" collision ionization, resulting in dielectric breakdown. Discharge channel.
(2) Energy conversion, distribution and transmission
After the inter-electrode medium is broken down, the pulse power supply instantaneously discharges energy through the discharge channel and converts it into heat energy, kinetic energy, magnetic energy, light energy, energy generation and electromagnetic wave radiation energy. Most of the energy is converted into heat, which is transmitted to the electrode and the workpiece to form an instantaneous high-temperature heat source (up to 10000 °C) so that the local metal at the discharge point is melted and vaporized.
(3) Ejection of electrode material
The instantaneously melted and vaporized metal produces a powerful thermal explosive force, accompanied by electrodynamic forces and fluid forces, causing the erosion of the metal material to be thrown away from the electrode and the surface of the workpiece, leaving a pit on the surface.
(4) Deionization of interelectrode medium
After a pulse discharge, the interelectrode medium should be immediately deionized, the dielectric strength should be restored, and arcing or secondary discharge should be avoided at the same place. Therefore, there should be a sufficient pulse interval between the two pulse discharges, and the electrolytic corrosion products should also be Eliminate in time.
Compared with the belt drive, the China chain supplier(GETECHAIN) https://www.getechain.com/
has no elastic sliding and slipping in the stainless steel chain transmission mode, which can maintain an... moreCompared with the belt drive, the China chain supplier(GETECHAIN) https://www.getechain.com/
has no elastic sliding and slipping in the stainless steel chain transmission mode, which can maintain an accurate average transmission ratio; the required tension is small, the pressure acting on the shaft is also small, and the bearing can be reduced. Friction loss; compact structure; can work under harsh environmental conditions such as high temperature and oil.
Compared with the gear transmission method, the manufacturing and installation accuracy of the stainless steel chain transmission is required to be low; when the center distance is large, the transmission structure is simple. The instantaneous chain speed and instantaneous transmission ratio are not constant, so the transmission is less stable and there is a certain impact and noise in the work.
The stainless steel chain drive has an accurate average transmission ratio, high transmission efficiency, wide range of inter-axis distance, and can be used in environments with high temperature and high humidity. However, stainless steel chain transmission can only be used as parallel shaft transmission, and its The instantaneous transmission ratio fluctuates and the transmission noise is large. Since the links are rigid, there is a polygonal effect (i.e., motion non-uniformity) that changes the instantaneous gear ratio of the chain drive and causes additional dynamic loads and vibrations that must be considered when selecting the chain drive parameters. Stainless steel chain drives are widely used in transportation, agriculture, light industry, mining, petrochemical and machine tool industries.
In the process of decoration, it is necessary to purchase some basic household standard equipment. Household water filters have also become a relatively popular small household appliance in the... moreIn the process of decoration, it is necessary to purchase some basic household standard equipment. Household water filters have also become a relatively popular small household appliance in the market in recent years. But there is a problem that bothers us. So, how to choose and buy Water Filter Spare Parts(KOKOELECTRIC) https://www.kokoelectric.com/
?
Usually, the water purified by the water filter can be drunk directly. No matter which type of water filter, its filter element is the key. There are mainly two kinds of kitchen water purifier: pure water purifier and super filter. The water filtered by the pure water machine and the ultrafiltration machine can be directly drunk without boiling and drinking and is simple, quick and convenient.
Prices of domestic water filters range from several thousand yuan to tens of thousands of yuan. The key is to look at the filter element. At present, the internal pipeline design of water filters on the market is basically the same, mainly composed of polypropylene cotton, granular carbon, compressed carbon, reverse osmosis membrane or ultrafiltration membrane, post-activated carbon, etc. Generally, the filter element consists of four or five stages in turn. Generally speaking, there are more than four filter elements.
In addition, it is not easy to select and purchase qualified water filters. Due to the mixed fish beads in the water filter market, the water quality is uneven. According to the recent sampling inspection results by the quality inspection department, the qualified rate of ultrafiltration water filter is higher than that of other water filters. The qualified rate of the former is 59%, and the qualified rate of the latter is 23%. The comparative test of water purification effect shows that the ultrafiltration water purification effect is better than that of ordinary water filters.
As the development of China's water filter industry is in the primary stage, many people make use of the loopholes that consumers do not know about water filters to produce some inferior products to deceive consumers, thus obtaining huge profits. In order to prevent consumers from being cheated, we should pay attention to the purchase of professional brands and authoritative brands. Professional water purification brands have professional construction and installation teams, and after-sales service is also guaranteed.
To purchase a Water Filter Spare Parts(KOKOELECTRIC) https://www.kokoelectric.com/
, you need to master a certain method. Otherwise, if you choose the wrong one, it may affect its operation. How to... moreTo purchase a Water Filter Spare Parts(KOKOELECTRIC) https://www.kokoelectric.com/
, you need to master a certain method. Otherwise, if you choose the wrong one, it may affect its operation. How to choose water filter spare parts?
1. If the water filter is broken, you need to replace the accessories. When purchasing, pay attention to whether it is consistent with the original accessories.
2. If you can't find the manufacturer of the original parts, you can consult the sales staff and buy alternatives.
3. Usually, the quality of the accessory is also critical. If you look closely at whether it is aging or rusting, it is best not to buy accessories that have not been sold for too long.
4. If you think the price is slightly higher, you can compare a few and choose a more cost-effective one, so it is not easy to buy the wrong.
5. In order to avoid buying inferior products, it is best to go to a regular store to buy, and go to a reputable store.
6. If you do not want to choose your own, you can also bring the maintenance personnel directly to replace the damaged accessories.
7. If you have no experience, look for the original manufacturer, find the same, and replace it. If you can't find it, consider letting the maintenance personnel handle it.
As a necessary Water Purifier Spare Parts(KOKOELECTRIC) https://www.kokoelectric.com/
, the quick connector is used in the order of installation. The first type, when removing the pipe, first take... moreAs a necessary Water Purifier Spare Parts(KOKOELECTRIC) https://www.kokoelectric.com/
, the quick connector is used in the order of installation. The first type, when removing the pipe, first take off the blue semi-circular small card at the interface, push the protruding part of the joint mouth, press it by hand, the pipe is easily taken down, remember not to be directly hard Pulling the pipe can easily cause the joint to leak. If the joint is found to seep, remove the pipe and cut off a small section to reconnect.
In the second type, the left hand holds the white moving ring, and the right hand pulls out the water pipe at the same time, and the tube is easily removed.
The first type of the same type, when connecting the pipe, first remove the blue semi-circular small clip at the interface, cut the white water pipe provided by the machine, and insert the pipe into the joint. After the pipe is tightly tightened, pull it out slightly, then the card is stuck and the pipe connection is completed.
The second type, flatten the white water pipe connection provided by the machine, insert the pipe into the joint forcefully, and then try to pull it out, it will not be pulled out.
As we all know, the Driving chain manufacturer(GETECHAIN) https://www.getechain.com/product/driving-chain/
industry is a discrete manufacturing industry. Its production method is to process raw... moreAs we all know, the Driving chain manufacturer(GETECHAIN) https://www.getechain.com/product/driving-chain/
industry is a discrete manufacturing industry. Its production method is to process raw materials into parts, which are assembled into finished products through component assembly and overall assembly. Its characteristics are mainly as follows:
1. With the globalization of industrial production and the rapid development of information technology, the personalized needs of customers are also gradually increasing, and the variety of products is becoming more and more diversified. At the same time, market demand is changing rapidly, making it more difficult to predict. It is not continuous and difficult to provide a reliable basis for reasonable production arrangement.
2. The product structure of the driving chain is relatively complex. It is generally assembled by rollers, sleeves, pin shafts, link plates, and other parts. However, there may be more than seven or eight kinds of the non-standard driving chain but as many as dozens of kinds of parts. These parts are limited by the processing capacity and equipment. Some need to be purchased from external processing, others need to be processed by themselves, and the calculation and arrangement of the production plan are very complicated due to frequent changes in the production process. At present, with a large number of orders increasing, under certain manufacturing capacity, there is a phenomenon of temporary insertion of orders urgently needed by some large customers, which makes it difficult to give consideration to the flexibility and seriousness of production planning, and production planning is often difficult to guide production.
3. Due to the uncertainty of the production plan and the lack of real-time grasp of the stock materials, stock materials are often sluggish and the materials needed for production are short of parts. Incompatible phenomena coexist at the same time. This is why, on the one hand, the manufacturing cost calculated by the financial department has increased significantly, while on the other hand, the output value has not increased.
4. Due to the different working procedures and process control of each part of the driving chain, the production capacity of each working procedure is usually unbalanced, the processing difficulty varies from large to small, the semi-finished product completion time varies from long to short, barrel effect is easy to occur in production, production is restricted by key bottleneck resources, and often one part is not in place, affecting the timely completion and delivery of the entire contract.
5. Some outsourced parts need to be processed by outsourced manufacturers. Due to the large variety and variable quantity, some processes are relatively complicated. For example, some parts are processed in one outsourced manufacturer and then processed in another or several outsourced manufacturers for the next process. Thus, tracking and controlling the quality and delivery time of outsourced products is also very difficult. Although this phenomenon has improved with the introduction of the concept of first management, which brings the supplier into the controllable management scope, it is still not very optimistic.
In order to produce qualified furniture mould, we must ensure the quality of Furniture Mould(FURNITUREMOULD) https://www.furnituremould.com/
. What measures can be taken to improve the quality of... moreIn order to produce qualified furniture mould, we must ensure the quality of Furniture Mould(FURNITUREMOULD) https://www.furnituremould.com/
. What measures can be taken to improve the quality of furniture mould?
A set of complete furniture mould production management system is established to realize the computer information management system of product data management, process data management, plan management and schedule management in the production management process of furniture mould, including the formulation of furniture mould production plan, mould design, process formulation, workshop task assignment and product inspection, warehouse management, etc., so that furniture mould manufacturing and related auxiliary information can realize all-round tracking management from plan formulation to completion and delivery.
The information of planning, design, processing technology, workshop production, human resources, etc. are organized and integrated to coordinate planning and production effectively, which can effectively ensure the quality of furniture mould and delivery on schedule.
Effectively manage the scrap of cutting tools by effectively controlling the issuance of work tickets in the workshop; Through accurate furniture mould structure design, efficient furniture mould parts processing, and accurate parts inspection, the additional cost caused by furniture mould design changes and maintenance will be effectively reduced, thus obtaining the actual cost of each set of furniture mould and effectively controlling the quality of furniture mould.
The water purifier is composed of spare parts with different functions. We know that the core component of the water purifier is the filter element of the water purifier. In addition to the filter... moreThe water purifier is composed of spare parts with different functions. We know that the core component of the water purifier is the filter element of the water purifier. In addition to the filter element, the average user knows very little about other Water Purifier Spare Parts(KOKOELECTRIC) https://www.kokoelectric.com/
. So, what are the spare parts of a standard water purifier?
1. Computer board (controller): The control board is the core component of the water purifier and controls the normal operation of the whole water purifier.
2. High-voltage switch: when the pressure of the water purifier is too high, the high-voltage switch will be closed to prevent damage to the filter element.
3. Water inlet solenoid valve: The function of the water inlet solenoid valve is to open the water inlet during water making or flushing, and close the water inlet during standby or power failure, so as to achieve the purpose of not wasting water when the machine is not working.
4. Pressure barrel: The function of the pressure barrel is to store water when you do not need it, and to discharge water for your use when you use it.
5. Reverse osmosis membrane: under a certain pressure, water molecules can pass through the reverse osmosis membrane, while impurities such as inorganic salts, heavy metal ions, organic matters, colloid, bacteria, viruses and the like in the source water cannot pass through the RO membrane, thus strictly distinguishing permeable pure water from impermeable concentrated water.
6. Filter element: The filter element of the water purifier is to clean the polluted water to a state required by production and life, that is, to make the water reach certain cleanliness. Remove solid particles from water, kill bacteria and filter out harmful chemical components.
7. Non-return valve: The function of the non-return valve is to maintain pressure. Prevent pure water from flowing back into the reverse osmosis membrane and flowing out of the wastewater pipe, and at the same time cause the high-pressure pipeline to lose pressure and the motor to start repeatedly.
8. Gooseneck faucet: Gooseneck faucet solves the problems of running water, dripping water and leaking water in the traditional faucet, and the pressure of water outlet is not high, so that water will not be everywhere when in use.
9. Chassis: The service life of the plastic shell is shorter than that of stainless steel, but it is not as fast as that of plastic in the use of replacement. Each has its own advantages.
10. Frame: the structural material of the water purifier.
11. Inlet tee: a pipe fitting in a drain pipe, used for vertical connection between a branch pipe and the main pipe.
12. Booster pump: The booster pump is installed in the pipeline to increase the water pressure when water passes through the pump.
13. Power adapter: The power supply conversion equipment of water purifier is generally composed of components such as casing, transformer, inductor, capacitor, control IC, PCB board, etc. Its working principle is converted from AC input to DC output.
14. Low-voltage switch: The function of a low-voltage switch is to protect the machine when the water supply is cut off or the water pressure is insufficient in the home. When the water supply is cut off or the water pressure is insufficient, the low-voltage switch will disconnect the machine and stop working automatically to prevent the booster pump from idling without water and causing damage to the circuit of the machine.
The above water purifier spare parts basically cover the components included in an ordinary water purifier. The accessories not mentioned may not be listed due to the unique functions of some water purifiers or the limitations of different models such as water softeners and water purifiers. With the continuous development of water purifier technology, the types and functions of water purifier spare parts are also continuously derived and updated. Currently, the types of water purifier spare parts are also being extended for the new generation of water purifier products based on artificial intelligence and Internet of Things technology. Water purifier accessories are also gradually showing the characteristics of small volume, intelligence, multifunction and light materials.