Pepper Kerala Holidays is the leading prominent service provider of kerala taxi packages/services, Kochi Taxi, Kerala Taxi, Cochin car rentals, Sabarimala Taxi, Kochi Airport Taxi, Luxury Tempo... morePepper Kerala Holidays is the leading prominent service provider of kerala taxi packages/services, Kochi Taxi, Kerala Taxi, Cochin car rentals, Sabarimala Taxi, Kochi Airport Taxi, Luxury Tempo traveller, Travels in Cochin
1. the long-term shutdown of 12V DC Freezer will cause the lubricating oil in the compressor to sink to the bottom, and all the workpieces in the machine will be dry. At this time, if it is opened,... more1. the long-term shutdown of 12V DC Freezer will cause the lubricating oil in the compressor to sink to the bottom, and all the workpieces in the machine will be dry. At this time, if it is opened, the compressor piston will run without lubrication, which will affect the life of the compressor. This will cause economic losses.
2. How to start using the 12V DC freezer that has been discontinued for a long time
When restarting a freezer or refrigerator after a long period of inactivity, three immediate starts are required. The specific method is: connect and disconnect the power supply, repeat it every 5 minutes, and turn it on and off 3 times in total.
3. Suggestions on 12V DC freezer
If you find abnormal noise or shutdown of 12V DC freezer after initial startup, if it cannot be recovered, you should ask professionals from regular companies to repair it. Do not disassemble and repair by yourself, so as not to expand the scope of failure.
The method of uniform coating in China Die Casting Factory, in addition to selecting reasonable solution composition and improving formula, reasonable operation, mounting parts and adopting some... moreThe method of uniform coating in China Die Casting Factory, in addition to selecting reasonable solution composition and improving formula, reasonable operation, mounting parts and adopting some special measures are very important in production. The commonly used methods are:
1. Impulse current: at the beginning of electroplating, a large current (2 ~ 3 times larger than the normal current) is used for short-term impulse electroplating.
2. Reasonable mounting and hanging of parts: the parts are in a uniform current distribution state, and at the same time, the precipitated gas does not stagnate in the blind holes and low-lying parts of the parts.
3. Adjust the distance between cathode and anode as possible, and reduce the distance ratio between different parts of cathode (i.e. concave and convex parts of parts) and anode.
4. Using pictographic anode to improve current distribution.
5. The protection cathode and shielding protection are used to reduce the current density in the concentrated parts of power lines.
The quality of die casting includes appearance quality, intrinsic quality and service quality. Appearance quality refers to the roughness, surface quality, dimensional tolerance, form and position tolerance and quality deviation of casting surface. Internal quality refers to the chemical composition, physical and mechanical properties, metallographic structure and pores, inclusions and cracks in the casting; Service quality means that castings can meet various service requirements and working performance, such as wear resistance, corrosion resistance, machinability and weldability.
Zinc Die Casting is also our hot product, if you are interested in our products, you can click our website: https://www.chinaweilong.cn/less
China Lead Die Casting is a kind of pressure casting part, which uses a pressure casting machine equipped with a casting die, pours the heated liquid lead into the feeding port of the die casting... moreChina Lead Die Casting is a kind of pressure casting part, which uses a pressure casting machine equipped with a casting die, pours the heated liquid lead into the feeding port of the die casting machine, and casts the lead alloy parts with the shape and size limited by the die casting machine. Such parts are usually called lead die casting.
Lead die casting produced according to conventional procedures generally do not deform, and castings with complex shapes and thin walls may be deformed due to uneven stress during ejection or improper holding time, collision during transportation, or residual stress due to structural limitations of castings (such as warpage of castings with larger planes after die casting). Under normal circumstances, correction by manual or mechanical means is allowed after deformation.
OEM Aluminum Enclosure is also one of our product, welcome to buy and purchase! less
When a batch of chest freezer enter the laboratory, the Chest Freezer Factory first sets the ambient temperature in the climate control room to 70°F to simulate the conditions of most kitchens.... moreWhen a batch of chest freezer enter the laboratory, the Chest Freezer Factory first sets the ambient temperature in the climate control room to 70°F to simulate the conditions of most kitchens. Then, we ensure that the temperature setting of each chest freezer will place the chest freezer between 36°F and 38°F in the center of the equipment.
We did the same thing in the chest freezer to find out how to keep the temperature of the chest freezer room at-1 f and 1 f. It is important to note that we will not punish the chest freezer for inaccurate setting. The key is that you need to know how to make them reach the 37°F and 0 F marks. This is the reason why we now include this information in our chest freezer rating table.
Food stored at 0 F or below can be eaten indefinitely (although quality and taste may be impaired over time). Although many foods freeze at about 32 degrees Fahrenheit, they need to be stored at 0 degrees Fahrenheit to slow down deterioration and make them cooler and better. And don't worry about cold temperatures-temperatures defined by exposure to air rather than temperature.
In order to ensure that your chest freezer operates at an appropriate temperature, please use a chest freezer thermometer to monitor the temperature and ensure that the chest freezer is thawed at regular intervals to ensure its effective operation.
In short, the most suitable temperature for the chest freezer is-18 C or less. Once the required temperature is selected, it may take some time to display and reach the temperature. This is because it takes time to reach the temperature in the chest freezer.
Want to know more about it, the Ice Cream Freezer Suppliers will answer your questions. less
However, due to inflation, the rise in human capital costs, changes in the supply-demand relationship of China Die Casting Factory, and the increase in raw materials, all these factors have hindered... moreHowever, due to inflation, the rise in human capital costs, changes in the supply-demand relationship of China Die Casting Factory, and the increase in raw materials, all these factors have hindered the survival of a die-casting factory. In addition, the good and bad are mixed in the sales market, and the overall strength of the stores is uneven. There is usually intentional market competition.
1. Main production force
The great leader Chairman Mao said that high and new technology is the first productive force. For customers, it is very important whether the goods can be supplied immediately. Therefore, it is very easy to gain the trust of customers to upgrade the main production force of die casting factories.
2. Quality
The steady development of economic development has also brought with it standardized regulations. Product quality is the competitive advantage of die casting factories. Whether the product quality is defective, accurate or durable. The best thing is to establish a set of quality inspection management system, which can enhance the quality of products and the service level of enterprises.
3. Efficiency
How to improve the working efficiency of employees and how to improve the efficiency of enterprises are also very important. Therefore, an efficient and effective management plan is absolutely necessary. Without rules, Fiona Fang cannot be achieved. The actual effect of creating a strict management plan is immediate. Naturally, both hard and soft measures must be applied. The welfare of employees must be well done. The overall planning of the sun and the shade is the absolute principle.
4. Enterprise Innovation Ability
A good die-casting factory is all about pursuing perfection and overall goals. With its own relative quality, an enterprise has a good mental outlook, long-term overall goals and excellent enterprise atmosphere. This is always to promote the development trend of the enterprise, enhance the enterprise's spiritual culture and innovation ability.
China Aluminum Die Casting Products is also one of our product, welcome to buy and purchase! less
1. Ice cream is stored in the Ice Cream Showcase during the day, and the temperature is between-16 and-19 degrees. The ice cream showcase is set to automatically defrost every 6 hours for 6 minutes.... more1. Ice cream is stored in the Ice Cream Showcase during the day, and the temperature is between-16 and-19 degrees. The ice cream showcase is set to automatically defrost every 6 hours for 6 minutes. when the machine performs automatic defrosting, the temperature will rise to between-5 and-8, which is normal.
2. Ice cream should be moved to the refrigerator (or freezer) for storage at night (it is recommended to shut down the ice cream showcase for rest at night for five to seven days). The temperature should be at least between-18℃ and-20℃, and the temperature of -25℃ is the best condition.
3. The refrigerator (or freezer) storing ice cream should be defrosted in real-time, once or twice a week.
4. As the ice cream is relatively hard just after being taken out of the freezer, it is suggested that the ice cream should be quickly transferred from the freezer to the showcase after the temperature of the showcase reaches -10 degrees in the morning. Later, the hardness of the ice cream can be tested with a test spoon. after about half an hour, the ice cream will reach a moderate hardness. the temperature of the showcase is automatically set to between-16 and-19. if the temperature rises rapidly due to outdoor temperature, the temperature can be adjusted manually.
5. Cover the ice cream with plastic wrap at night. If there are water drops in the plastic wrap, replace it immediately, because the water drops will contact the ice cream, causing ice cream to have ice residue, which will seriously affect the taste of the ice cream.
6. If the fruit on the fruit series ice cream is not fresh, it should be replaced in time, otherwise, it will cause customers to think that the ice cream is not fresh. Decorations including some milk series ice cream should be replaced immediately if they are not fresh.
7. The ice cream ball should be hit forward from the last part of the ice cream tray, and then moved forward when the back part is dug up from top to bottom. In this way, the ice cream decorated in front will not be damaged and its beauty will not be affected. In addition, when digging ice cream balls, by the way, all the remnants on the side of the dish will be dug up and cleaned up while digging, so that there will not be too many remnants in the dish and the vision will not be affected.
8. Check the ice cream at all times to keep it fresh and attractive to customers. Found a surface melting place or; Oxide layer; Use an ice cream scoop to scrape it off. Check and wipe stains on the display case at any time to make the window of the ice cream display case bright and clean.
9. All actions of the ice cream at normal temperature must be fast, so as to avoid the ice cream contacting normal temperature, because this will cause the ice cream to melt and then freeze to form ice crystals, affecting the taste.
10. Wash the ball player every time you play a ball. This will not affect the color and taste of the next taste. In addition, the water stains on the ball hitting device are shaken dry to prevent the water stains from falling on the ice cream to form ice crystals. Immediately after the ball is played, the ice cream display case is closed to prevent hot air from entering the display case.
11. The freshness of ice cream is within 2 weeks (this 2 week refers to the 2 weeks from the date when a plate of new ice cream stored in the freezer is placed in the showcase). It is suggested that ice cream can be sent out in the form of promotion within 10 or 15 days, such as buy one get one free. Don't ruin the brand by saving a little cost.
12. If the existing types of ice cream are not enough to cover the ice cream display case, clean empty plates should be used to fill the position, otherwise, the temperature of the display case will be affected.
13. Ice cream in the ice cream showcase should be placed alternately in different colors, because bright contrasting colors will attract customers' attention.
Commercial Ice Cream Freezer is also our hot product, you can click to view. less
The label industry has entered a stable growth period in Europe and the United States, with adhesive and heat transfer film materials growing rapidly. In North America and Europe, self-adhesive... moreThe label industry has entered a stable growth period in Europe and the United States, with adhesive and heat transfer film materials growing rapidly. In North America and Europe, self-adhesive labels have already accounted for about 50% of the total label market share, and wet adhesive labels are gradually showing a downward trend. The increase in the proportion of heat transfer film materials is closely related to a large number of labeling machines and the strength of flexographic printing. In addition, the growth rate of both in-mould labels and shrink-wrap wrapped labels exceeds 5%, with shrink-wrap expected to grow by 14% in North America in 2006, becoming the biggest bright spot in the label industry. Coupled with the increased use of heat transfer film materials in self-adhesive labels, these all put forward higher requirements for print labels supplier https://www.print-labels.net/ .
Judging from the international situation and development trend of adopting new technologies in label printing, the four technologies of the smart label, in-mould label, heat-shrinkable film label and digital label printing have developed rapidly.
·Smart tags
With people's higher and more complete information demand for the production, storage and transportation, quality assurance, anti-counterfeiting, management and other aspects of commodities, the traditional bar code labels are obviously beyond their capacity. With the progress of science and technology and its application in the field of label manufacturing, a brand new, multifunctional and smart label with good anti-counterfeiting effect has been widely used, which will bring new vitality and vigour to the label manufacturing and printing industry.
·In-mould label
In-mould label is also an in-mould label, which is a brand-new label printing form different from traditional direct silkscreen printing, heat-shrinkable label and self-adhesive label. According to the label forming method, it can be divided into blow moulding in-mould label and injection moulding in-mould label. The surface is treated with PP or synthetic paper, and the back is coated with special hot melt adhesive to form special label paper. After the label is printed and manufactured, the label is sent to the inside of the mould by a manipulator, and the hot melt adhesive resin on the back of the label in the mold is melted by the high temperature extruded by plastic melt adhesive so that the label and the container are integrated.
·heat shrinkable film label
Heat shrinkable packaging is a widely used packaging method in commodity packaging. It can be used to package various types of products and has the characteristics of transparency, sealing, moisture resistance, packaging, etc. However, its technology and equipment are simple, the packaging cost is low, and the packaging methods are various, which are favoured by merchants and consumers. Labels in the heat-shrinkable film are a part of the label market. Currently, they are growing rapidly and their market share is expanding. The annual growth rate is expected to be about 15%, which is much higher than the annual growth rate of about 5% in the general label market. They have great development potential and become a bright spot in the label printing industry.
·Digital label printing technology
In foreign thermal paper, printing paper is very simple in circulation and promotion, but sometimes the requirements for product tracking involve variable codes or anti-counterfeiting requirements, as well as inquiry codes, and labels need secondary printing, even directly variable personalized printing, which is directly related to digital technology.
The development space of label printing is very large and the potential market is vast. We must seize the opportunity and meet the challenge. The application and development of new label printing technology will be promising.
The future era of commercial freezers is more advanced technology and perfect. The current Commercial Ice Cream Freezer https://www.chinafreezers.com/ can save a large part of resources for... moreThe future era of commercial freezers is more advanced technology and perfect. The current Commercial Ice Cream Freezer https://www.chinafreezers.com/ can save a large part of resources for enterprises, and can also pack ice cream freezer products without manpower. With the help of advanced science and technology in the future, commercial ice cream freezer will bring us more surprises. The development of ice cream freezers industry is bound to be a dream in the future.
Although commercial ice cream freezer has become one of the top ten industries in China's ice cream display cabinet industry, there is still a gap between the whole and developed countries due to their late start. China's commercial ice cream freezer industry can only replace the traditional mode of introduction and imitation with scientific and technological innovation, close to users, and independent research and development as soon as possible, so as to make China's commercial ice cream freezer develop in an intelligent direction, make the ice cream freezer industry move to a high-tech road, and catch up with the footsteps of the ice cream freezer industry in developed countries.
Ningbo Bailing Refrigeration Technology Co., Ltd is located in the well renowned city of Cixi at the staring point of the Hangzhou Bay Cross-sea Bridge. The local industrial area has eagerly earned its fabulous reputation and has such been nicknamed "The Kingdom of electrical appliances". For more product details, please click on our official website: https://www.chinafreezers.com/less
The shrink sleeve labels https://www.print-labels.net/product/plastic-labels/shrink-sleeve-labels.html have strong adaptability, can decorate plastic, wood, paper, metal, glass, ceramic and other... moreThe shrink sleeve labels https://www.print-labels.net/product/plastic-labels/shrink-sleeve-labels.html have strong adaptability, can decorate plastic, wood, paper, metal, glass, ceramic and other packaging containers, and are widely used in beer and beverage, medicine and health care, daily chemical products, leisure food, stationery and other fields. In order to achieve the best overall labeling effect, it is not only necessary to adjust the thermal shrinkage temperature of the labeling machine, but also important to select label materials and design patterns.
The design of decoration pattern on the film sleeve shall be determined according to the thickness of the film. When designing patterns, we must first find out the horizontal and vertical shrinkage rate of the film, as well as the allowable shrinkage in all directions after packaging and the allowable deformation error after decoration pattern shrinkage, so as to ensure that the contracted patterns and characters can be accurately restored.
The materials used for shrink sleeve labels should mainly consider three factors: environmental protection requirements, film thickness and shrink performance.
The basis for determining the film thickness is the application field and cost factors of the label. Of course, the price is not the decisive factor, because each kind of film has its own uniqueness. Users and trademark printing factories must specify the film used and the process most suitable for the materials before signing the contract. In addition, the required indexes of processing equipment and other technological factors also directly affect the selection of thickness.
In addition, the heat shrinkable film tube is also the material for producing shrink sleeve labels, and can be formed at one time without sewing in production. Compared with horizontal flat film, the cost of shrink sleeve labels is lower, and the surface printing of the tube body is more difficult to realize. At the same time, the picture and text of shrink sleeve labels can only be printed on the surface of the film, and the picture and text are easily worn during transportation and storage, thus affecting the whole packaging effect.
Taizhou Gete Color Printing is a heat transfer film and label supplier as well as a designated printing trademark unit in Taizhou city, striving to provide customers with the best quality services. For more product details, please click on our official website: https://www.print-labels.net/less
With the progress of the industry, the manufacturing process of the combine chains https://www.getechain.com/ has also made great progress, and it is manifested in all aspects, including processing... moreWith the progress of the industry, the manufacturing process of the combine chains https://www.getechain.com/ has also made great progress, and it is manifested in all aspects, including processing technology, processing equipment and various heat treatments. The following will introduce the progress one by one.
From the processing technology of the combine chains, in addition to some of the original technologies, new technologies have also begun to emerge. The forming process of the combine chains involves new technologies such as continuous rolling, shot peening, hole extrusion, roller cold extrusion forming, high-speed repeated bright blanking of link plates, four-point riveting head, double-sided printing, etc., which to some extent promotes the quality of the combine chains to be greatly improved.
In terms of processing equipment, high-speed driving chain sheet blanking machine, high-speed pin roll machine, high-speed pipe coiling machine, roller five-station cold extrusion machine, combine chains installation driving line, high-speed chain installation machine, multi-station flat top chain active forming installation line, etc. are all special-purpose equipment developed for the production of combine chains. Compared with traditional devices, both processing efficiency and processing quality have been significantly improved.
The combine chains are bound to undergo heat treatment after being manufactured and moulded, so this aspect cannot be behind, of course, and greater progress makes the combine chains more ideal in performance.
In our life, self-adhesive labels can be said to be everywhere. Label forms can be seen in various products, and the most widely used are self-adhesive labels. Compared with traditional labels,... moreIn our life, self-adhesive labels can be said to be everywhere. Label forms can be seen in various products, and the most widely used are self-adhesive labels. Compared with traditional labels, self-adhesive labels have the advantages of no brush, no paste, no flooding, no pollution, saving label time, etc. It is widely used, convenient and fast. Self-adhesive is a kind of material. Paper, film or other special materials are used as fabric. Self-adhesive is coated on the back and silicon protective paper is coated as a composite material. After printing, die-cutting and other processing of finished labels.
In the past two years, self-adhesive label printing, as a new force in the print labels supplier https://www.print-labels.net/ industry, has become a topic of much discussion in the industry. Self-adhesive labels are mainly used for liquid washing products and popular personal care products. Film materials are mainly used in medium and high-grade daily chemical products. Popular personal care products and household liquid washing products occupy a large proportion in the market, so the corresponding paper materials are used more. In addition to the application, development, maturity and perfection of the label printing process itself, the entire peripheral supply chain is gradually enriched and perfected. It can be said that the current competition in the industry is very fierce. With the shortening of the mature cycle of technology, it can be predicted that future competition in the industry will be more intense.
Based on the long-term development of printing enterprises, in order to obtain the strength of sustainable operation, it is very important to cooperate with suppliers to realize the mutual benefit. As far as printing costs are concerned, since raw materials account for a considerable proportion of printing costs, how to choose a good supplier has become a topic that printing enterprises must face. As a part of the supply chain of the whole industry, printing enterprises and suppliers should cooperate effectively to obtain the most cost-effective products, which is the work that printing enterprises must carefully check. After all, competitive price suppression is not the only way for the long-term development of the industry, and win-win is the only way for the healthy development and growth of the industry.
Each commodity has its own unique value, and each product has its own advantages and disadvantages. If you want to buy high-quality products, the more professional knowledge you know, the more... moreEach commodity has its own unique value, and each product has its own advantages and disadvantages. If you want to buy high-quality products, the more professional knowledge you know, the more confident you will be. So if you don't know, can you not buy quality products? Of course not, you only need to learn a few simple tips, you can also choose the best and most suitable among many similar products. The following is one of the accessories of the water purifier and the selection method of the water pipe of the Water Purifier Spare Parts https://www.kokoelectric.com/ .
Although the water pipe of the water purifier is only a very small pipe, it is impossible for the water purifier to filter sewage, let alone water transportation, without its assistance. Buying a high-quality water pipe is of great help to the safe use of the water purifier, so how to judge the water pipe quality of the water purifier?
Water purification pipes are widely applicable. Water purification products in the water purification market can basically be used. The selection can be tailored to different types of products such as water purifier, water purifier, pipeline machine, water softener, direct drinking machine, etc. The selection of water pipes can be measured according to the following aspects:
1. High-quality raw materials
It is very important to do a good job in the foundation of a high-rise building. Raw materials are equivalent to the foundation of a product. The choice of high-quality raw materials is very important.
2. Strong practicability
Vacuum shaping can ensure high precision, good roundness, high sealing performance, no water leakage, exquisite workmanship, emphasis on detection, etc. of direct drinking water pipes, which are related to the beauty of the products and also affect the service effect and service life of water purifier pipes.
3. High safety
The PE water pipe of the water purifier is odorless, nontoxic, stable in chemical properties, acid and alkali resistant, free of residual dirt, free of bacteria, clean and healthy. PE water pipe is a kind of odorless and nontoxic food grade data.
I often see people asking such questions as which is better, ultrafiltration membrane or reverse osmosis water purifier. The following Reverse Osmosis Systems Manufacturer ... moreI often see people asking such questions as which is better, ultrafiltration membrane or reverse osmosis water purifier. The following Reverse Osmosis Systems Manufacturer https://www.kokoelectric.com/product/reverse-osmosis-systems/ will make a simple comparison for everyone. First, let's talk about ultrafiltration membrane.
Ultrafiltration water purifier: The core filter element of the ultrafiltration water purifier is an ultrafiltration membrane, and the pore diameter of the ultrafiltration membrane ranges from 0.1 to 0.111 microns. Bacteria, silt, macromolecular organic matters, rust and the like in water can be trapped by the ultrafiltration membrane, while dissolved odor, pigment, organic matters and inorganic matters in water can pass through the membrane together with water molecules. Therefore, the ultrafiltration water purifier cannot filter out the residual chlorine in the water. Boiled water may also produce scale.
Reverse osmosis water purifier: The principle of reverse osmosis is a popular water purification method in the world. The core filter element of a reverse osmosis water purifier is a reverse osmosis membrane with a pore diameter of only 0.0001 microns, while even small viruses have a diameter of 0.2 microns, so they cannot pass through the reverse osmosis membrane. In addition, heavy metals, inorganic salts, organic matters, bacteria and the like dissolved in water cannot pass through the reverse osmosis membrane. Water passing through the reverse osmosis membrane can reach the direct drinking standard.
Comparison of Advantages and Disadvantages between Ultrafiltration Water Purifier and Reverse Osmosis Water Purifier;
The quality of the water filtered by the reverse osmosis water purifier is safe, various harmful substances in the water can be removed, the hardness of the water can be reduced, and scale cannot be generated. However, the power consumption is relatively high, and there are more joints, the structure is complex, and the price is high.
In contrast, the ultra-filtration water purifier consumes less electricity, has fewer connectors, has a simple structure and is cheap. However, it cannot effectively remove the chemical pollutants in the water, and cannot reduce the hardness of the water, which will produce scale.
No matter what type of aircraft, the most important thing is to look at the local water quality, and please don't blindly follow the trend. You can ask professional personnel before selecting, and then choose according to your own situation after comparison.
ECCA wire can be used as signal transmission, but as power transmission, it is easy to cause problems, and the service life of its products will be greatly reduced. In fact, in the use of ECCA wire, pay attention to the oxidation protection of the lower enameled wire section to ensure the effective combination of copper and aluminum, which can be used for a long time.
Copper clad aluminum wire and ECCA wire are actually not applicable in many fields, but in fact, many enterprises are using transformers, which is very worrying. There are two worries about the use of ECCA wire: its resistivity is higher than that of copper with equal cross-section, and the temperature rises. The oxidizability of aluminum wires will further increase the wire resistance and prevent oxidation.
The most worrying thing is the combination of copper and aluminum in ECCA wire. The industry often says that the metallurgical combination is really reliable in long-term use. In the process of expansion with heat and contraction with cold, there is no real demonstration in the industry as to whether the copper-aluminum combination ability can stand the test.
The metal aluminum composite panel is widely used for exterior wall curtain walls, interior decoration, furniture, kitchen cabinets, and also can be used for identification signs, such as car 4s stores, car gas stations, high-speed toll stations, stores, etc. The a2-grade metal aluminum composite panel can be made of steel plates and aluminum plates with thicknesses of 2mm, 3mm, 4mm, 5mm and 6mm, and used for a series of purposes such as television backboards.
Characteristics of aluminum composite panel:
1. Thermal insulation (thermal conductivity: 0.11): Its thermal insulation and thermal insulation are six times that of glass, three times that of clay and ten times that of ordinary concrete.
2. High strength: the advantages of high strength, good ductility, strong anti-seismic capability and abrasion and scratch resistance.
3. Fire resistance and flame retardancy (wall plate-4 hours fire resistance): It has certain fire resistance and flame retardancy and will not generate harmful gas at high temperature; The coefficient of thermal conductivity is very small, which makes the heat transfer slow, can effectively resist fire and protect its structure from fire.
4. Good durability: As the surface is wear-resistant and scratch-resistant, and it is mostly used for interior decoration, the durability is very good and will last for a long time.
The lightweight nylon fabric https://www.wanshiyitex.com/product/nylon-fabric/ is as tough as polyester, so it has excellent performance in tensile resistance and abrasion resistance. These... moreThe lightweight nylon fabric https://www.wanshiyitex.com/product/nylon-fabric/ is as tough as polyester, so it has excellent performance in tensile resistance and abrasion resistance. These characteristics also greatly improve the practicability of nylon. This is also why many of the rush clothes or waterproof clothes on the market are made of nylon.
Secondly, nylon has extremely high heat resistance. Crystalline nylon will not damage the quality even in an environment of 150 degrees Celsius. Therefore, nylon is not easy to be damaged due to high temperature during processing.
Excellent fatigue resistance is another major feature of nylon fabric. No matter how the fabric can be stretched or folded, its strength will not be lost. It is very suitable for occasions with periodic fatigue, such as bicycle rims and handrails of escalators, etc. Therefore, the application of nylon is not limited to the clothing field.
In addition, nylon itself is non-toxic and harmless, and will not damage the human body during production or wearing. In addition, nylon has the characteristics of easy dyeing and easy moulding, which provides convenience for the design and production of clothing.
Finally, nylon has outstanding wear resistance and corrosion resistance. It can resist corrosive substances such as gasoline, alcohol and salt. Therefore, clothes made of nylon fabric have strong corrosion resistance. Therefore, it can be said that it is a relatively easy-to-care fabric. Washing can be directly thrown into the washing machine, which can be described as a necessary clothing for lazy people.
The last point is that the price of nylon cloth is not high, so the price of this kind of clothing is also more affordable.
The memory fabric https://www.wanshiyitex.com/product/memory-fabric/ is relatively mature and affordable in the textile market and is very popular in the fabric market due to its non-ironing... moreThe memory fabric https://www.wanshiyitex.com/product/memory-fabric/ is relatively mature and affordable in the textile market and is very popular in the fabric market due to its non-ironing characteristics. There are generally three kinds of memory-like fabrics, semi-memory fabrics and full-memory fabrics on the market. The three kinds of fabrics have different effects on the finished products due to different technologies and materials.
The so-called "semi-memory" in the market refers to the "memory fibers" used in the warp or weft direction, while the "full memory" usually refers to the fabrics woven with "memory fibers" as the warp and weft raw materials. However, the "memory-imitating" fabric is made of filaments, which is more difficult to dye than full memory. Imitation memory fabric mainly uses PET twisting to make it have certain memory function, but it has no better memory effect than PTT fabric, but the price is cheaper than full memory fabric.
In the fabric market, many manufacturers also use ordinary polyester yarns to twist and treat them with light alkali or non-alkali to falsely claim that they are memory fabrics. The fabrics produced by this process are mostly crude in hand feeling, weak in toughness, poor in elastic recovery after deformation, relatively weak, and unable to achieve the effect of memory fabrics.
In order to make the performance of Roller chain https://www.getechain.com/product/driving-chain/heavy-roller-chain/ more stable and its service life longer, it is necessary to check and maintain the... moreIn order to make the performance of Roller chain https://www.getechain.com/product/driving-chain/heavy-roller-chain/ more stable and its service life longer, it is necessary to check and maintain the sprocket of the roller chain frequently. If the selection of shafts, bearings and bearings, chains and sprockets, lubrication forms and system installation are correct, then a maintenance system should be established to ensure the normal use of roller chains. What should be included in the maintenance system for roller chains?
1. The transmission mechanism has correct lubrication;
2. No interference in the transmission system;
3. Damaged chains and sprockets shall be replaced in time;
4. Chains and sprockets with serious wear should be replaced;
5. The sprocket should be aligned;
6. The chain should be properly tensioned;
7. The protective device is in good condition and installed correctly;
8. The roller chain transmission device shall be inspected 50 hours after the first installation and use. After that, the chain transmission that bears severe impact load or works in bad conditions shall be inspected every 200 hours. For most of the transmission that works in normal conditions, the inspection can be conducted every 500 hours. The inspection time shall be determined according to the use of roller chain and corresponding countermeasures shall be made.
With the improvement of living standards, people's requirements for sunshades are getting higher and higher. Consumers not only pay attention to appearance quality but also pay more attention to the... moreWith the improvement of living standards, people's requirements for sunshades are getting higher and higher. Consumers not only pay attention to appearance quality but also pay more attention to the safety and environmental protection of fabrics. The hot summer sun is scorching, the Sunshine Fabric https://www.warpknittedfabric.com/product/sunshine-fabric/ can effectively prevent the indoor temperature increase caused by solar radiation, the winter cold wind is bitter, and the sunshine fabric can reflect the dissipated heat back to the indoor, thus maintaining the indoor comfortable warm environment. Therefore, the multifunctional attribute of the sunshine fabric is becoming more and more obvious.
1. Heat insulation and energy conservation
Sunshine fabric has good heat insulation properties that other fabrics do not have, can effectively block the heat generated by solar radiation, greatly reduce the utilization rate of indoor air conditioning, not only eliminate solar radiation, but also keep indoor air unblocked, and have a panoramic view of the beautiful scenery outside the window.
2. Fire prevention and flame retardant
Fire-retardant and the flame-retardant sunshine fabric is a flame-retardant treatment based on sunshine fabric. The upgraded product can not only effectively prevent the spread of flame, but also protect the original properties of the fabric. It can automatically extinguish or effectively slow down the spread of flame, carbonize the fabric to form an isolation layer, and at the same time meet fire.
It has the characteristics of non-melting and non-delay and has good flame retardant effect.
3. UV protection
The use of anti-ultraviolet sunshine fabric can resist 95% of ultraviolet rays and effectively prevent ultraviolet rays from damaging skin and furniture. When the sun is directly shining, you can easily block the damage of ultraviolet rays and create a comfortable and healthy home environment by gently laying down the anti-ultraviolet sunshine fabric.
4. Antistatic and dustproof
At present, anti-static sunshine fabrics on the market can be roughly divided into three categories: anti-static fabrics made of PVC materials, fabrics embedded with anti-static fibers, and anti-static fabrics processed and finished by anti-static agents. The anti-static curtain is not only strong in anti-static but also can prevent the loss of cold air and warm air. Another good function is dust prevention. Dust is difficult to touch the curtain, so cleaning is relatively simple, and only dry cloth is needed to wipe the curtain on weekdays. In addition, the anti-static curtain can reduce noise decibels, prevent noise from spreading and provide a comfortable indoor environment.
Color Coated Aluminum Coil https://www.alubang.net/product/color-coated-aluminum-coil.html can be divided into a polyester aluminized coil (PE) and fluorocarbon aluminized coil (PVDF). The polyester... moreColor Coated Aluminum Coil https://www.alubang.net/product/color-coated-aluminum-coil.html can be divided into a polyester aluminized coil (PE) and fluorocarbon aluminized coil (PVDF). The polyester coating formed on the surface of the aluminum plate after baking for many times can form a continuous solid film with protective decoration. It is an anti-ultraviolet coating. Polyester resin is a polymer monomer with an ester bond in the main chain. Alkyd resin is added. Ultraviolet absorbers can be divided into sub-gloss series and high-gloss series according to gloss. It can make colourful aluminum products rich in color, with good gloss and smoothness, as well as excellent texture and hand feeling, and can also improve the grade and stereoscopic impression. It can protect objects exposed to air and attacked by ultraviolet radiation, wind, rain, frost and snow. Due to the influence of temperature difference, freeze-thaw cycle, corrosive gases and microorganisms, the coating can play a protective role. It is especially suitable for interior decoration and advertisement boards.
Application of Color Coated aluminum coil;
Color coated aluminum coil is rich in color. Whether it is residential buildings, large-scale commercial outlets or large-scale exhibitions, it can be strengthened with color coated aluminum coil. Good plasticity and workability make it an ideal material for various building forms. Color aluminum coil provides architects, designers and owners with personalized exterior walls and ceilings, as well as better architectural modelling materials. Whether it is a multi-functional large-scale building or a new type of building, the painted aluminum coil can always meet the different requirements of modern and classical architectural styles, making the building colorful. Most of the products are used in the fields of electronics, instruments, lighting, packaging, home decoration, etc.
Application scope of color coated aluminum coil:
Construction (aluminum plastic plate, aluminum honeycomb, roof plate, fire-resistant veneer, aluminum ceiling, louver, curtain door, garage door, awning, drainage ditch), electronic appliances (computer case, distribution board), lighting, furniture, solar reflector, air conditioning pipe, etc.).
ALUBANG was certified with ISO9001 in Quality Management Systems, ISO14001 in Environmental Management Systems, OHSAS18001 for Occupational Health and Safety certification. ALUBANG is the industry standard and national standard drafting unit for aluminum composite panels, aluminum honeycomb panels and aluminum corrugated panels and aluminum solid products. For more product details, please click on our official website: https://www.alubang.net/less
1. Aluminum Winding Wire(XINYU-ENAMELEDWIRE) http://www.xinyu-enameledwire.com/ has good electrical and thermal conductivity, ranking fourth after silver, copper and gold. Aluminum winding wire has... more1. Aluminum Winding Wire(XINYU-ENAMELEDWIRE) http://www.xinyu-enameledwire.com/ has good electrical and thermal conductivity, ranking fourth after silver, copper and gold. Aluminum winding wire has been used in many fields.
2. It has good plasticity and can be processed by cold or hot pressure to make various profiles, such as wires, wires, rods, tubes, etc. This characteristic is related to the face-centred cubic lattice structure of aluminum.
3. Good atmospheric corrosion resistance. Because an extremely dense aluminum oxide film is formed on the surface of the aluminum winding wire, it can effectively isolate the contact between aluminum and oxygen and prevent one-step oxidation of the aluminum surface.
4. Aluminum is very light (its density is 2.698g/cm3), which is about one-third of copper. Aluminum is often used as the basic component of various light structural materials. At present, aluminum alloy materials are widely used in our daily life.
5. Strength variability. The strength of aluminum is very low, but the strength can be greatly improved after cold deformation and work hardening.
As a metal material, copper clad aluminum is a material to be used in the industrial field, especially the cable raw material. Copper clad aluminum is more reliable than pure copper. Why is Copper... moreAs a metal material, copper clad aluminum is a material to be used in the industrial field, especially the cable raw material. Copper clad aluminum is more reliable than pure copper. Why is Copper Clad Aluminum Winding Wire(XINYU-ENAMELEDWIRE) http://www.xinyu-enameledwire.com/ more popular than pure copper products?
First, the use of pure copper reduces the production cost. The length ratio of copper wires of wires with the same composition and diameter is 2.6:1, thus greatly saving the use of pure copper. For example, the copper price of 10×100 copper is 50,000, and a copper watch is quoted at 476 yuan, while using the same standard copper-clad aluminum, the cost of a 10×100 meter copper-clad aluminum piece is 223 yuan, saving material cost. The second is that the measured value and the standard copper load capacity reach more than 85%, and other physical data are close to pure copper, which is very convenient in practice. Third, because the surface of copper-clad aluminum is coated with a layer of copper, it is not a problem to prevent oxidation. There is a copper-clad aluminum wire with a copper volume ratio of 15-20% and a copper-clad aluminum of 3.63-3.92g/cm3. The copper-clad aluminum composition is more convenient to transport and install than a simple copper lamp.