Description:In the injection moulding industry, each Household Product Mould(FURNITUREMOULD) https://www.furnituremould.com/product/daily-necessities-mould/
manufacturer is a consumable item. Like an injection mould, people can be divided into three stages: adolescence, maternal, and old age and the... moreIn the injection moulding industry, each Household Product Mould(FURNITUREMOULD) https://www.furnituremould.com/product/daily-necessities-mould/
manufacturer is a consumable item. Like an injection mould, people can be divided into three stages: adolescence, maternal, and old age and the corresponding values are not the same. The end result of household product mould is that ageing or ageing parts affect the quality of the product and require replacement or even scrapping of the newly opened mould. Therefore, the maintenance of household product moulds to generate maximum value in the life cycle is the direction we have been working hard. The maintenance of moulds for household products will result in corresponding costs, the most intuitive is to stop processing.
Maintenance points for household product mould:
1. The clamping force is unreasonable, and the clamping force is too large, causing the mould load to be too large, causing the mould to rise, resulting in flashing of the plastic product;
2. The speed of the unlocking mode is unreasonable, resulting in excessive damage to the injection mould during the clamping process;
3. The thimble parameters are improper, resulting in an uneven thimble or instantaneous impact force, which will damage the product deformation loss;
4. Correct low-pressure protection setting to prevent mould pressure loss;
5. Mould cleaning is required to avoid damage to the surface and joints;
6. Do lubrication, rust prevention and basic maintenance work to make the mould work normally.
Therefore, good product quality is required for good household product mould. Injection moulding manufacturers should regularly carry out mould repairs for household products to prevent equipment failures, affect various production conditions, extend the service life of household product mould, reduce production costs, and thereby improve household use. The greatest value of product moulds, this is also an issue that injection mould manufacturers should consider.
No Stickers to Show